Home > Windows Cannot > Windows Cannot Access The File Gpt.ini For Gpo 1058

Windows Cannot Access The File Gpt.ini For Gpo 1058

Contents

I also ended up removing my DNS from AD integrated and then returning it into AD integrated. But, from domain joined servers/computers, it was a no go.  I could get to \\server\sysvol\domain but it was empty.  Same with \\domain\sysvol\domain - empty. Thank you Dave Lipman for that fix. :D x 83 Logan K This event occurred on a Windows XP client in conjucture with Event ID 1080 and 4356. An example of Our approach Comments: Anonymous We got this on a virtualized domain controller. Check This Out

When you configure the domain controller in this way, the Workstation service on the domain controller cannot connect to the domain controller's Sysvol share. x 2 Sorin Srbu I decommissioned an obsolete DC and promoted a replacement server. It could be that dfsutil.exe is part of the Support Tools; if it's an unknown command, download and install the support tools: Windows Server 2003 Service Pack 2 32-bit Support Tools x 3 Alanden Where the NetBIOS and DFS fixes don't fix the problem, a patch is available from Microsoft that does fix it. https://support.microsoft.com/en-us/kb/887303

Windows Cannot Access The File Gpt.ini For Gpo 1058

If not your Group Policy share isn't going to work. In this domain, one part of AD-integrated DNS was not up to date for reasons we have not yet determined at this writing. The external preferred DNS entry was set to the internal LAN IP.

Finally, after issuing the GPUPDATE /FORCE command I then noted a single SCECLI event informing me the group policy was successfully applied. I've just copied the newer files from server 1 manually to the sysvol folder of server 2 and suddenly the error message was gone! Other posts from Microsoft engineer suggest that if a domain controller is multi-homed (more than 1 network card) they may experience this problem (note that "network card" could mean a physical Kb885887 x 2 Maxsl75 I heard of this error being fixed as follows: 1.

The solutions varied: 1. Windows Cannot Query For The List Of Group Policy Objects Server 2003 Please verify that the following users and groups have the right permissions for the folder shared as SYSVOL (typically this is C:\Windows\Sysvol): Administrators – Full Control (these are the default, inherited x 2 EventID.Net This problem occurs when network address translation (NAT) prevents LDAP requests from reaching services on the domain server. https://support.microsoft.com/en-us/kb/842804 I discovered that “\\server\netlogon” was no longer available.

Event ID: 1058 Source: Userenv Source: Userenv Type: Error Description:Windows cannot access the file gpt.ini for GPO CN={31B2F340-016D-11D2-945F-00C04FB984F9},CN=Policies,CN=System,DC=,DC=com. Kb840669 I gotmany 1030 and 1058 events on the DCs. Locate and then click the following registry subkey: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Lsa\Kerberos\Parameters. Recommend Us Quick Tip Connect to EventID.Net directly from the Microsoft Event Viewer!Instructions Customer services Contact usSupportTerms of Use Help & FAQ Sales FAQEventID.Net FAQ Advertise with us Articles Managing logsRecommended

Windows Cannot Query For The List Of Group Policy Objects Server 2003

I fixed the problem by running DCGPOFIX on the Win2k3 server followed by a reboot. http://www.eventid.net/display-eventid-1058-source-Userenv-eventno-1752-phase-1.htm x 87 Matteo In our case, this event was recorded along with event 11 from KDC on the domain controller. Windows Cannot Access The File Gpt.ini For Gpo 1058 The clients were then able to process GPO updates again. What Is Gpt.ini File x 7 Anonymous I encountered this error with EventID 1030 from source Userenv on Windows XP SP2 on about 10% of 150 workstations, which prevented logon script from running.

English: This information is only available to subscribers. his comment is here I checked drivers, netsh, etc for this “ghost” card, but it was nowhere to be found. x 100 Anonymous A combination of event 1030, 1058, and 4015 can occur when a NIC is replaced and the binding order is wrong. x 121 Anonymous I was getting this event every 5 minutes on my SBS 2003 DC after I was unable to open/edit several group policy objects.The problem was that I'd changed Windows Cannot Access The File Gpt.ini For Gpo Cn= 31b2f340-016d-11d2-945f-00c04fb984f9

Alternates as to which DC it afflicts. x 5 Andreas Czech In our case, the problem was caused by a registry entry that was missing. but no 1704 issue.There is a macantosh on the network, that when accessing Indesign or Photoshop files on the server crashes and occasionaly crashes the rest of the network. this contact form x 47 Tanja Ensure that the "TCP/IP NetBIOS Helper Service" is activated.

There is a corresponding warning EventID 40961 from source LsaSrv in the System log. Dfsutil /purgemupcache x 88 Anonymous In my case, it turned out that the problem here was the share permission for ''NT AUTHORITY\SYSTEM'' was missing on the SYSVOL share. Login here!

This IP adress is neither a part of your DC configuration nor a part of your subnet.

I would speculate that the policy refresh was when the server "discovered" the new DNS records in “_msdcs”. The posts also indicate that the Client for Microsoft Networks and the File and Printer Sharing services have to be bound to the network adapter. See ME909260 to solve this problem. Event Id 1030 Group Policy Failed The first event after the last 1030/1058 pair following it by 6 minutes was a SceCli 1704 policy refresh.

At the command prompt, type "dfsutil /PurgeMupCache" (without the quotation marks), and then press ENTER. Also, while working through this I discovered that besides the already cool "Resultant Set of Policy" MMC snap-in in Windows XP, there is also a "GPUPDATE" command in Windows XP which, One symptom of this is that you do not have access to the drives of non-domain controllers when you browse the network from some domain controllers. http://technologyprometheus.com/windows-cannot/windows-cannot-access-the-specified-device-path-or-file-rundll32-exe-windows-10.html x 115 Anonymous Our event ID 1030 and 1058 issues were caused by the downandup virus.

As a result, you'll get the 1058 error message ("access denied"). This method works, because by using the hosts file, the local DNS cache is loading the entries with a non-expiry TTL. For more information on this issue, check pages 10 & 11 of this document “Symantec Endpoint Protection 11.0 - SBS 2003 Best Practices White Paper”. In this case, I have used a router on the remote site to establish the VPN tunnel and I have overlooked the small checkbox ("Allow NetBIOS traffic") that has to be

This has solved my problem. x 1 Rolf A. Once that was installed, using command line ran the dfsutil and eventlog errors stopped. Every time I tried to copy (with domain admin privileges) files from a DC to a member server, it would give me an “account disabled” message.

x 188 Anonymous If you are running a Linksys VPN router BEFVP41 V2 it will not allow the GP to update.